Dolby Laboratories DP569 - page 44

Model DP569 User’s Manual DolbyRemote
5-4
Baud Rate
The communication baud rate for the DP569 may be set to 9,600, 19,200, or 38,400
(the default rate). The baud rate is configurable through the front panel of the
encoder. The rate you select in DolbyRemote must match the rate selected in the unit.
Address
The default address setting for the DP569 is 0x8280. If the address has been changed
from the front panel of the encoder, set the remote address accordingly.
Off-Line
The DolbyRemote application may be used off-line, without the presence of an
encoder. This allows configurations to be preprogrammed and stored.
Once the desired parameters have been set, as described above, click OK. When the
DolbyRemote application establishes communication with the unit, it will display the
unit’s current settings.
Figure 5-2 DolbyRemote Window