Draytek 2910 y Provide bridge traffic between two LANs through the air. y Extend the coverage range of a WLAN.

Vigor2910 Series User’s Guide 159
OK Click it to save the access control list.
Clear All Clean all entries in the MAC address list.
3
3. .1 12 2. .5 5 W WD DS S
WDS means Wireless Distribution System. It is a protocol for connecting two access points
(AP) wirelessly. Usually, it can be used for the following application:
y Provide bridge traffic between two LANs through the air.
y Extend the coverage range of a WLAN.
To meet the above requirement, two WDS modes are implemented in Vigor router. One is
Bridge, the other is Repeater. Below shows the function of WDS-bridge interface:
The application for the WDS-Repeater mode is depicted as below:
The major difference between these two modes is that: while in Repeater mode, the packets
received from one peer AP can be repeated to another peer AP through WDS links. Yet in
Bridge mode, packets received from a WDS link will only be forwarded to local wired or
wireless hosts. In other words, only Repeater mode can do WDS-to-WDS packet forwarding.