Draytek 2910 manual Virtual TA Server, Virtual TA User Profiles

As depicted in the above application scenario, the Virtual TA client can make an outgoing call or accept an incoming call to/from a peer FAX machine or ISDN TA, etc.

Before describing the configuration of Virtual TA in the Vigor routers, please heed the following limitations.

zThe Virtual TA client only supports MicrosoftTM Windows 98/SE/2000/XP platforms.

zThe Virtual TA client only supports the CAPI 2.0 protocol and has no built-in FAX engine.

zOne ISDN BRI interface has two B channels. The maximum number of active clients is also 2.

zBefore you configure the Virtual TA, you must set the correct country code in ISDN Setup.

Virtual TA Server	Enable: Select it to activate the server.
	Disable: Select it to deactivate the server. All Virtual TA
	applications will be terminated.
Virtual TA User Profiles	Username - Enter the username of a specific client.
	Password - Enter the password of a specific client.
	MSN 1/2/3 - MSN stands for Multiple Subscriber Number. It
	means you can apply to more than one ISDN lines number over
	a single subscribed line. Note that the service must be acquired
	from your telecom. Specify the MSN numbers for a specific
	client. If you have no MSN services, leave this field blank.
	Active - Check it to enable the client to access the server.
146	Vigor2910 Series User’s Guide