Draytek 2910 manual 14.2 TR-069 Setting, Default Gateway, Dns, Frequency Domain, Url

DHCP Server	Display the current status of DHCP server of the LAN
	interface.
MAC Address	Display the MAC address of the WAN Interface.
IP Address	Display the IP address of the WAN interface.
Default Gateway	Display the assigned IP address of the default gateway.
DNS	Display the assigned IP address of the primary DNS.
MAC Address	Display the MAC address of the wireless LAN.
Frequency Domain	It can be Europe (13 usable channels), USA (11 usable
	channels) etc. The available channels supported by the
	wireless products in different countries are various.
Firmware Version	It indicates information about equipped WLAN miniPCi
	card. This also helps to provide availability of some
	features that are bound with some WLAN miniPCi card.

3.14.2 TR-069 Setting

Vigor router with TR-069 is available for matching with VigorACS server. Such page provides VigorACS and CPE settings under TR-069 protocol. All the settings configured here is for CPE to be controlled and managed with VigorACS server. Users need to type URL, username and password for the VigorACS server that such device will be connected. However URL, username and password under CPE client are fixed that users cannot change

it. The default CPE username and password are "vigor" and "password". You will need it when you configure VigorACS server.

URL	Type the URL for VigorACS server.
	If the connected CPE needs to be authenticated, please
	set URL as the following and type username and
	password for VigorACS server:
	http://{IP address of
Vigor2910 Series User’s Guide	171