Draytek 2910 manual Enable Open Ports, Wan Ip, Local Computer, Start Port, End Port

To add or edit port settings, click one index number on the page. The index entry setup page will pop up. In each index entry, you can specify 10 port ranges for diverse services.

Enable Open Ports	Check to enable this entry.
Comment	Make a name for the defined network application/service.
WAN Interface	Specify the WAN interface that will be used for this entry.
WAN IP	Choose one of the WAN IPs from this drop-down list. This
	selection is available and can be seen only if you have set WAN IP
	Alias previously.
Local Computer	Enter the private IP address of the local host or click Choose PC to
	select one.
Choose PC	Click this button and, subsequently, a window having a list of
	private IP addresses of local hosts will automatically pop up. Select
	the appropriate IP address of the local host in the list.
Protocol	Specify the transport layer protocol. It could be TCP, UDP, or -----
	(none) for selection.
Start Port	Specify the starting port number of the service offered by the local
	host.
End Port	Specify the ending port number of the service offered by the local
	host.

56 Vigor2910 Series User’s Guide