Dukane 8111H user manual Alert Items are shown below

3. Network Functions

3.1 Configuring and controlling the projector via a web browser (continued)

The Alert Items are shown below.

Setting Item	Description
Alarm Time	Configures the time to alert.
	(Only Lamp Time Alarm and Filter Time Alarm.)
SNMP Trap	Click [Enable] check box to enable SNMP Trap alerts.
Send Mail	Click [Enable] check box to enable e-mail alerts.
	(Except Cold Start and Authentication Failure.)
	Configures the subject line of the e-mail to be sent.
Mail Subject	The length of the subject line can be up to 100 alphanumeric
	characters.
	(Except Cold Start and Authentication Failure.)
	Configures the text of the e-mail to be sent.
Mail Text	The length of the text can be up to 1024 alphanumeric
	characters.
	(Except Cold Start and Authentication Failure.)

Click [Apply] button to save the settings.

NOTE • The trigger of Filter Error e-mail is depending on the FILTER MESSAGE setting in the SERVICE item of the OPTION menu which defines the period until the filter message is displayed on the projector screen. The e-mail will be sent when the filter time exceeds 500, 1000, 2000, 3000, 4000 or 5000 hours based on the configuration. No notification e-mail will be sent if the FILTER MESSAGE is set to OFF. (OPTION menu in the User’s Manual – Operating Guide)

•Lamp Time Alarm is defined as a threshold for e-mail notification (reminder) of the lamp time. When the lamp hour exceeds this threshold that is configured through the Web page, the e-mail will be sent out.

•Filter Time Alarm is defined as a threshold for e-mail notification (reminder) of the filter time. When the filter hour exceeds this threshold configured in the web page, e-mail will be sent out.

21