Command Control via the Network, Communication Port | Dukane 8111H

3. Network Functions

3.7 Command Control via the Network

You can configure and control the projector via the network using RS-232C commands.

Communication Port

The following two ports are assigned for the command control.

TCP #23(Network Control Port1 (Port: 23))

TCP #9715(Network Control Port2 (Port: 9715))

NOTE • Command control is available only via the specified port above.

Command Control Settings (17)

Configure the following items from a web browser when command control is used.

Example: If the IP address of the projector is set to 192.168.1.10:

1)Enter “http://192.168.1.10/” into the address bar of the web browser.

2)Enter the Administrator ID and password and click [Logon].

3)Click [Port Settings] on the main menu.

4)Click [Enable] check box to open Network Control Port1 (Port: 23) to use TCP #23. Click [Enable] check box for [Authentication] setting when authentication is required, otherwise clear the check box.

5)Click [Enable] check box to open Network Control Port2 (Port: 9715) to use TCP #9715. Click [Enable] check box for [Authentication] setting when authentication is required, otherwise clear the check box.

6)Click [Apply] button to save the settings.

44

Image 44

Dukane 8111H Command Control via the Network, Communication Port, Following two ports are assigned for the command control

Contents

Thank you for purchasing this projector Web controlMY Image Still Image Transfer Display Messenger Function Content Main functions Equipment connection and network settingConfiguring and controlling the projector via a web browser Network Functions Configuring and controlling via a web browser MY Image Still image Transfer Display Messenger Function Setup menu in the User’s Manual Operating Guide Required equipment preparation Manual network connection setting Network settingsEquipments connection Open Network Connections. .2.2.b Manual network connection setting Set IP address, subnet mask and default gateway for computer For example About IP address Setting manuallySetting automatically Internet Option setting Click 3.c Local Area Network LAN Settings window Check connection Configuring and Controlling the Projector via a Web Browser Projector Management using SnmpCommand Control via the Network Mail Alerts Configuring and controlling the projector via a web browser Configuring and controlling the projector via a web browser Password Logon Projector Name Displays the projector name settings Displays the Dhcp configuration settingsOnly displayed when logged on using an Administrator ID Network Information Displays and configures network settings Port Settings Displays and configures communication port settings Click Apply button to save the settings Mail Settings Displays and configures e-mail addressing settingsSend mail Smtp Server Address Alert Settings Displays and configures failure & alert settingsAuthentication Failure Cold Start Alert Items are shown below Schedule Settings Displays and configures schedule settings Description Schedule Date Month/Day First, 2, 3, 4, Last Date/Time SettingsDisplays and configures the date and time settings Time difference Cycle Security Settings Up to 64 alphanumeric characters Configures the community name if Snmp is usedCommunity name Projector Control Adjusts the vertical picture position Adjusts the horizontal picture position Hdmi Detected Projector Status Displays the current projector status When Logoff is clicked, the Logon menu is displayed. 14 Network RestartRestarts the projector’s network connection Logoff Mail Settings 19 Mail Alerts Mail Alerts Projector Management using Snmp Snmp Settings 17 Event Scheduling Schedule Settings 22 Event Scheduling Date/Time Settings 24 Manual concise Still Image Transfer MY Image Still Image Transfer Display Network Restart on the main menu Messenger Function Messenger Function Communication Port Command Control via the NetworkFollowing two ports are assigned for the command control Command Control via the Network Command Format Reply Error codeHeader Data length RS-232C command Check Sum Connection TCP #9715 Reply Data format Authentication Automatic Connection Break Connecting devices LAN port Control port Condition Communication setupOperating Guide Transmission method HALF-DUPLEX HALF-DUPLEX FULL-DUPLEX Dukane Corp AV Service Dept