Time difference, Cycle | Dukane 8111H manual

3. Network Functions

3.1 Configuring and controlling the projector via a web browser (continued)

		Item	Description

	Time difference		Configures the time difference. Set the same time difference
	Time difference		as the one set on your computer. If unsure, consult your IT
			manager.
	SNTP		Click the [ON] check box to retrieve Date and Time information
	SNTP		from the SNTP server and set the following items.
			from the SNTP server and set the following items.
			Configures the SNTP server address in IP format.
			• The address allows not only IP address but also domain
		SNTP Server Address	name if the valid DNS server is setup in the Network Settings.
			The maximum length of host or domain name is up to 255
			characters.
		Cycle	Configures the interval at which to retrieve Date and Time
		Cycle	information from the SNTP server (hour:minute).
			information from the SNTP server (hour:minute).

Click [Apply] button to save the settings.

NOTE • The new configuration settings are activated after restarting the network connection. When the configuration settings are changed, you must restart the network connection. You can restart the network connection by clicking [Network Restart] on the main menu.

•If you connect the projector to an existing network, consult a network administrator before setting server addresses.

•To enable the SNTP function, the time difference must be set.

•The projector will retrieve Date and Time information from the time server and override time settings when SNTP is enabled.

•The internal clock’s time may not remain accurate. Using SNTP is recommended to maintain accurate time.

25

Image 25

Dukane 8111H user manual Time difference, Cycle

Contents

Web control Thank you for purchasing this projectorMY Image Still Image Transfer Display Messenger Function Equipment connection and network setting Content Main functionsConfiguring and controlling the projector via a web browser Network Functions MY Image Still image Transfer Display Configuring and controlling via a web browser Messenger Function Required equipment preparation Setup menu in the User’s Manual Operating Guide Network settings Manual network connection settingEquipments connection Open Network Connections. .2.2.b Set IP address, subnet mask and default gateway for computer Manual network connection setting Setting automatically About IP address Setting manuallyFor example Click Internet Option setting Check connection 3.c Local Area Network LAN Settings window Projector Management using Snmp Configuring and Controlling the Projector via a Web BrowserCommand Control via the Network Mail Alerts Configuring and controlling the projector via a web browser Configuring and controlling the projector via a web browser Logon Password Displays the Dhcp configuration settings Projector Name Displays the projector name settingsOnly displayed when logged on using an Administrator ID Network Information Displays and configures network settings Displays and configures communication port settings Port Settings Click Apply button to save the settings Displays and configures e-mail addressing settings Mail SettingsSend mail Smtp Server Address Displays and configures failure & alert settings Alert SettingsAuthentication Failure Cold Start Alert Items are shown below Displays and configures schedule settings Schedule Settings Date Month/Day Description Schedule Displays and configures the date and time settings Date/Time SettingsFirst, 2, 3, 4, Last Cycle Time difference Security Settings Community name Configures the community name if Snmp is usedUp to 64 alphanumeric characters Projector Control Adjusts the horizontal picture position Adjusts the vertical picture position Hdmi Detected Displays the current projector status Projector Status Network Restart When Logoff is clicked, the Logon menu is displayed. 14Restarts the projector’s network connection Logoff Mail Alerts Mail Settings 19 Mail Alerts Snmp Settings 17 Projector Management using Snmp Event Scheduling Event Scheduling Schedule Settings 22 Manual concise Date/Time Settings 24 Still Image Transfer Network Restart on the main menu MY Image Still Image Transfer Display Messenger Function Messenger Function Following two ports are assigned for the command control Command Control via the NetworkCommunication Port Command Control via the Network Reply Error code Command FormatHeader Data length RS-232C command Check Sum Connection TCP #9715 Reply Data format Automatic Connection Break Authentication LAN port Control port Connecting devices Operating Guide Communication setupCondition HALF-DUPLEX Transmission method FULL-DUPLEX HALF-DUPLEX Dukane Corp AV Service Dept