Operating
Operating
Adjusting the volume
VIDEO RGB SEARCH
1. Press the VOLUME button on the remote control.
A dialog will appear on the screen to aid you in adjusting the
ASPECT | AUTO BLANK |
MAGNIFY
VOLUME
volume.
2. Use the cursor buttons ▲/▼ to adjust the volume.
ON
OFF
MUTE
To close the dialog and complete the operation, press the VOLUME button again. Even if you don’t do anything, the dialog will automatically disappear after a few seconds.
Temporarily muting the sound
ASPECT | AUTO BLANK |
MAGNIFY
VOLUME
1. Press the MUTE button on the remote control.
A dialog will appear on the screen indicating that you have muted the sound.
ON
OFF
MUTE
FREEZEKEYSTONE
To restore the sound, press the MUTE or VOLUME button. Even if you don’t do anything, the dialog will automatically disappear after a few seconds.
Selecting an input signal
1. Press the INPUT button on the projector.
Each time you press the button, the projector switches its input port as below.
RGB IN1 RGB IN2
VIDEO S-VIDEO COMPONENT VIDEO
1. Press the RGB button on the remote control to select an input port for the RGB signal.
Each time you press the button, the projector switches its RGB input port as below.
RGB IN1 RGB IN2
VIDEO RGB SEARCH
ASPECT | AUTO BLANK |
●When the TURN ON is selected to the AUTO SEARCH item in the OPTION menu ( 36) , the projector checks the RGB IN1 port fi rst. If no input is detected at the port, the projector will check the RGB IN2 port.
1. Press the VIDEO button on the remote control to select an input for video signal.
Each time you press the button, the projector switches its video input port as below.
COMPONENT VIDEO S-VIDEO VIDEO
VIDEO RGB SEARCH
ASPECT | AUTO BLANK |
●When the TURN ON is selected to the item AUTO SEARCH of OPTION menu ( 36) , the projector checks the COMPONENT VIDEO port fi rst. If no input is detected at the port, projector will begin to check other ports in above order.
17
