Operating
Searching an input signal
1. Press the SEARCH button on the remote control.
The projector will start to check its input ports in order to fi nd any input signals.
Then when an input is found, the projector will stop searching and display the image. If no signal is found, the projector will return to the state selected before the operation.
VIDEO RGB SEARCH
ASPECT | AUTO BLANK |
RGB IN 1 RGB IN 2 COMPONENT VIDEO
Selecting an aspect ratio
1. Press the ASPECT button on the remote control.
Each time you press the button, the projector switches the mode for aspect ratio in turn.
For an RGB signal
NORMAL 4:3 16:9 | VIDEO | RGB SEARCH |
| ASPECT | AUTO BLANK |
For a video signal/no signal | MAGNIFY | VOLUME |
4:3 16:9 SMALL | ON |
|
|
|
●The NORMAL mode keeps the original aspect ratio of the signal.
●For an HDTV signal of 1125i (1080i) or 750p (720p) as the COMPONENT VIDEO input, only 16:9 mode can be selected.
●Performing the automatic adjustment initializes the aspect ratio setting.
Adjusting the zoom and focus
1.
2.
Use the zoom knob to adjust the screen size. | Focus ring | Zoom knob |
Use the focus ring to focus the picture.
18
