Multifunctional settings
PICTURE
Menu
With the PICTURE menu, the items shown in the table below can be performed.
Select an item using the cursor buttons ▲/▼ on the projector or remote control, and press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to execute the item. Then perform it referring to the following table.
MENU [RGB] | :SELECT |
PICTURE | BRIGHTNESS ＋0 |
IMAGE | CONTRAST ＋0 |
INPUT | GAMMA DEFAULT 1 |
SETUP | COLOR TEMP 6500K |
SCREEN | COLOR +0 |
OPTION | TINT +0 |
EASY MENU | SHARPNESS +0 |
| PROGRESSIVE TURN OFF |
| MY MEMORY SAVE 1 |
Item | Description |
|
BRIGHTNESS | Using the buttons ▲/▼ adjusts the brightness. : | Light Dark |
CONTRAST | Using the buttons ▲/▼ adjusts the contrast. : | Strong Weak |
Using the buttons ▲/▼ switches the GAMMA mode. #1 DEFAULT #1 CUSTOM #2 DEFAULT
#3 CUSTOM #3 DEFAULT #2 CUSTOM
To adjust #1 CUSTOM, #2 CUSTOM or #3 CUSTOM
| Selecting a mode of CUSTOM and then |
| pressing the button ► or the ENTER button |
| displays a dialog to aid you in adjusting the |
| mode. |
| This function is useful when you want to |
| change the brightness of particular tones |
| Choose an item using the buttons ◄/►, and |
GAMMA | adjust the level using the buttons ▲/▼. |
|
|
| ENTER : |
|
| ||
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
+0 +0 +0 +0 | +0 +0 +0 | +0 | |||||
|
| GAMMA [CUSTOM 1] |
|
| |||
You can display a test pattern for checking the effect of your adjustment by pressing the ENTER button
Each time you press the ENTER button, the pattern changes as below.
No pattern Gray scale of 9 steps 
Ramp Gray scale of 15 steps
The eight equalizing bars correspond to eight tone levels of the test pattern except the darkest in the left end. If you want to adjust
the 2nd tone from left end on the test pattern, use the equalizing
adjustment bar “1”. The darkest tone at the left end of the test pattern cannot be controlled with any of equalizing adjustment bar.
When this function is performed, a certain extra such as a line
may appear
25
