Dukane 8914 user manual Image Menu, Aspect Over Scan Position Phase, For an RGB signal

Multifunctional settings

IMAGE Menu

With the IMAGE menu, items shown in the table below can be performed.

Select an item using the cursor buttons ▲/▼ on the projector or remote control, and press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to execute the item. Then perform it referring to the following table.

MENU [RGB]	:SELECT
PICTURE	ASPECT         4:3
IMAGE	OVER SCAN      5
INPUT	V POSITION     25
SETUP	H POSITION     142
SCREEN	H PHASE        16
OPTION	H SIZE         1344
EASY MENU	AUTO ADJUST EXECUTE

Item

ASPECT

OVER SCAN

VPOSITION

H POSITION

H PHASE

Description

Using the buttons ▲/▼ switches the mode for aspect ratio

For an RGB signal

4:3  16:9  NORMAL

For a video signal / no signal 4:3  16:9  SMALL

•The NORMAL mode keeps the original aspect ratio of the signal.

•For an HDTV signal of 1125i (1080i) or 750p (720p) as the COMPONENT VIDEO input, this item can't be selected.

•Performing the automatic adjustment initializes the aspect ratio setting.

Using the buttons ▲/▼ adjusts the over-scan ratio

Large (It reduces picture)  Small (It magnifi es picture)

•This item can be selected only for a video signal

•When this adjustment is too large, certain degradation may appear at the frame area of the picture. In such a case, please adjust small.

Using the buttons ▲/▼ adjusts the vertical position.

Up  Down

Using the buttons ▲/▼ adjusts the horizontal position.

Left  Right

Using the buttons ▲/▼ adjusts the horizontal phase to eliminate fl icker.

Right  Left

•This item can be selected only for an RGB signal or a component video signal. Note that this does not work with the input signal of 525i(480i)/625i(576i) from the component video port

28