Replacing the Lamp
3. Remove the lamp unit.
Lamp unit
4. Insert the new lamp unit until it is fully in.
Caution
• Neither touches the glass surface of the lamp di- rectly with your hand nor stains it. If you touch it with a bare hand, oil or other substances on your hand may adhere to the lamp, possibly preventing it from performing as specified and therefore lead to a short- ened lamp life, a darkened screen, etc.
5. Close the handle, and tighten the screw.
• Tighten the two screws with a ª screwdriver.
6. Attach the light-source lamp cover and tighten the screw.
• Tighten the two screws with a ª screwdriver.
Note
• When closing the lamp cover, please insert the left side (with the two claws) in first and then ensure that the protruding part found on the reverse side of the cover fits snugly into the hole of the main unit. As this protrusion acts as a switch, misfitting leads to power not being able to flow in.
48
