Dukane MPS2 user manual Universal Interactive touch panel, Operation of the MPS, General operation

User Manual - Mobile Projection System with

Interactive Touch Panel Control

Universal Interactive touch panel

The multimedia Mobile Projection System has been equipped with a special IR (infrared) receiv- er system that detect the command signals from the hand held interactive touch panel control and relays them to the projector, DVD-VCR, camera and other devices. The detector for this system is located in the front panel under the tilting projec- tor plate. The detector receives the IR signals that may be reflected from the screen or other items before the cart.

Fig.2. HOME PAGE

window on the front of the interactive touch panel control. The interactive touch panel can be oper- ated in the docking station or hand held simply pointed toward the screen. While in the docking station the batteries are being automatically recharged so when removed it is fully charged.

Fig.1. Touch Panel in Docking Station

The system depending on the model may also have a universal interactive touch panel control such as the Philips Pronto. This interactive touch panel come fully programmed for operation of the Mobile System. This means the interactive touch panel has the unique command code for the devices on the cart. The model of the system and the software version is indicated on the "Home" page of the interactive touch panel. The interac- tive touch panel, shown in Figure 1, comes with a docking station and internal rechargeable batteries.

Operation of the MPS

To turn ON the system simply touch the "On/Off" button on the panel. The next page, Fig 3, will then appear with special buttons to turn ON each device. Touch each of these buttons. It will take about 15 seconds for the projector to respond and start its lamp. If the projector control lights are ON it is in the warm-up process. Should something not start, the command can be issued again, however, if it was ON it may be turned Off. The buttons send the same command for ON or OFF. Next go back to the Home page by touching the "Home" button in the lower right.

General operation

The interactive touch panel control and docking station are included inside the cart drawer. Remove and place them on the top plate with the dark edge side facing toward the screen. The IR signals are emitted through the dark plastic

Please note that a page will disappear after about 45 seconds if no actions are taken. This is to conserve battery life. Touching the panel or pushing any button will activate the panel image. The touch panel will also beep indicating a command has been received.

MPS Users Manual 3