Binatone XDC1520 manual Basic Specifications, Changing the PIN-code, Factory defaults

Changing the PIN-code

The PIN-code is necessary to ensure usage of certain telephone functions. The factory setting is 0000. You may set any code of four figures at your

discretion.

1.With the telephone in the standby mode, press the MENU button [3].

2.By pressing the button [5], select the SYSTEM menu item, then press OK [3].

3.By pressing the button [5], select the CHANGE PIN menu item, then press OK [3].

4.Enter the current PIN-code, then press OK [3].

5.Enter the new PIN-code, then press OK [3].

6.Repeat the new PIN-code, then press OK [3].

Factory defaults

You may reset all changes in settings to the factory default values.

1.With the telephone in the standby mode, press the MENU button [3].

2.By pressing the button [5], select the SYSTEM menu item, then press OK [3].

3.By pressing the button [5], select the RESET menu item, then press OK [3].

4.Enter the PIN-code, then press OK [3].

5.The LCD display [2] will show the inscription Confirm? Press OK [3] to confirm.

BASIC SPECIFICATIONS

ENGLISH

Operating frequency	1880-1900 MHz
Operating distance	Up to 300 meters outdoors
	Up to 50 meters indoors
Operating time	Standby mode – 120 hours
	Talk mode – 10 hours
	Full battery charge time – 14 hours
Temperature range	Operation from 0 °C to 40°C
	Storage from -20°C to 60°C
Rechargeable battery	Capacity 750 mAh, NiMH type
Voltage	Handset – 2.4V
	Base unit – input 230V, output 9V

39