Binatone XDC1520 manual On the base unit, On the handset

Notes:

1.The handset you received with your package is already registered to your base unit. This feature is needed when you want to register another handset or when you have accidentally de-registered your handset.

2.Before registering a handset check that its battery is fully charged and that it is located near the base unit.

3.You may additionally register handsets of any model made by any manufacturer provided that such handsets are GAP-compatible. But if you have registered a different brand handset, some of its additional functions may be inoperable.

On the base unit:

Press and hold the handset locator button [12] until you hear a beep. This means that the base unit has switched to the registration mode. The base unit will continue working in this mode for 90 seconds, after that it returns to the normal mode.

On the handset:

1.With the telephone in the standby mode press the MENU button [3].

2.By pressing the button [5] select the SYSTEM menu item, then press OK [3].

3.By pressing the button [5] select the REGISTRATION menu item, then press OK [3].

4.By pressing the dialing buttons [8] enter the PIN-code (the factory default is 0000), then press OK [3].

Note: If the registration procedure is a success, the display will show the handset name and number.

If the registration procedure failed, the handset’s number will not be shown and the indicator which shows connection between the base unit and the handset will start blinking. You then need to repeat the registration procedure.

If you register a handset of a different manufacturer or model, look at the registration instructions in the User’s manual of that handset.

ENGLISH

11