Binatone XDC1520 manual Service signals, Base unit ringer melody, Auto-Answer, Flash duration

Service signals

1.With the telephone in the standby mode, press the MENU button [3].

2.By pressing the button [5], select the SOUNDS menu item, then press OK [3].

3.By pressing the button [5], select the SERVICE SIGNALS menu item, then press OK [3].

4.	By pressing the	or	button [5], select the ON or OFF menu items.
5.	Press OK [3] to confirm.

Base unit ringer melody

1.With the telephone in the standby mode, press the MENU button [3].

2.By pressing the button [5], select the SOUNDS menu item, then press OK [3].

3.By pressing the button [5], select the BASE UNIT MELODY menu item, then press OK [3].

4.	By pressing the		or	button [5], select the required volume level.
5.	Press the	button [5].
6.	By pressing the		or	button [5], select the melody you prefer.
7.	Press OK [3] to confirm.

Auto-Answer

With this function switched on, you may answer calls just by lifting the handset from the base unit without pressing any button.

1.With the telephone in the standby mode, press the MENU button [3].

2.By pressing the button [5], select the DETAILED menu item, then press OK [3].

3.By pressing the button [5], select the ANSWERING MACHINE menu item, after that press OK [3].

4.	By pressing the	or	button [5], select the ON or OFF menu item.
5.	Press OK [3] to confirm.

Flash duration

You may select one of the two pre-determined Flash duration options.

1.With the telephone in the standby mode, press the MENU button [3].

2.By pressing the button [5], select the DETAILED menu item, then press OK [3].

3.By pressing the button [5], select the R menu item, then press OK [3].

4.	By pressing the or button [5], select the R1 or R2 menu items.
5.	Press OK [3] to confirm.
	35

ENGLISH