Input Wizard: Step 2, Set Input Priority
Input Priority is used to select inputs if EDGE is set for Auto Input Select, which is the default. If one or more inputs has active signal, EDGE will choose the active signal with the highest priority. You may use the Input Wizard to change priority as shown on this page.
2a. Set Input Priority
Input Priority is used to auto- matically select inputs when EDGE is in Auto Input Select mode, which is the default.
If EDGE is in Auto Input Select Mode, and multiple inputs are powered on, then EDGE will select the input with the Highest Priority.
If you don’t want to change
Input Priority, press Down
Arrow to go to step 3.
2b. Change Input Priority
To change Input Priority put the highlight bar over the input you want to change then press OK.
Use Down Arrow to move the selection, then press OK
10
