DVDO Edge setup guide Connect your TV

EDGE Output Connections

DVDO Edge -- Rear View of output Connectors

Connect your TV to the Video/Audio output.

Connect your AV Receiver to the Audio Only HDMI output if the Receiver has HDMI.

OR

Connect your AV Receiver to the Optical Audio Out connector if your Receiver does not have HDMI.

1. If you don’t have an AV Receiver, skip to # 2.

If your AV receiver has HDMI input, connect an HDMI cable from Edge’s Audio Only HDMI output to an HDMI input on your AV receiver.

If your AV Receiver does not have HDMI, connect an Optical cable from the Optical Audio Out to an optical input on your AV Receiver.

Use your AV Receiver’s remote to power on the AV Receiver and set its input

to Edge.

2. Connect your TV.

If your TV has HDMI input,connect an HDMI to HDMI cable from Edge’s Video/Audio output to an HDMI input on your TV.

If your TV or monitor has DVI input, you will need an HDMI to DVI adapter cable. Connect the HDMI end to Edge’s Video/Audio HDMI output and the DVI end to your TV or monitor.

Use your TV’s remote to power up and set its input to Edge.

Plug in Edge’s AC cable (if you haven’t done so already).

5