External
Interface
Socket
Battery life
When used away from the AC adaptor, the internal batteries will provide up to four hours of keyboard operation (editing or creating labels) or enough power to print up to two tape cassettes. Any labels stored in the memory will be retained for up to six weeks on a full charge.
AC adaptor
The Labelmaker can be connected to the AC supply, using the AC adaptor, for continuous operation. The AC adaptor will also charge the internal batteries all the time it is connected to the AC supply. If you have been using the Labelmaker from battery power, re- connect it to the AC adaptor after use to ensure that the batteries are always fully charged. Note that the batteries cannot be overcharged.
The external interface socket at the rear of the Labelmaker enables you to plug in a range of optional cartridges.
DO NOT ATTEMPT TO CONNECT ANYTHING OTHER THAN AN APPROVED DYMO CARTRIDGE FOR THE 6000 ELECTRONIC LABELMAKER TO THE EXTERNAL INTERFACE SOCKET.
DYMO® 6000 Labelmaker | 7 |
