UL/BOX
NEW
+ UL/BOX
WIDTH
JUSTIFY 
+ WIDTH
M in
MC 
+ M in
COPIES
123...n
+ COPIES
CASSETTE
LENGTH
+ CASSETTE
VERT
COLOUR
+ VERT
One press underlines the complete label.
A second press puts a line box around the complete label. Pressing a third time gives underline and line box.
Press again to cancel and return to normal text.
Clears the current label from the display and resets the Labelmaker to normal settings — i.e.
Selects double, reduced or normal width characters, as shown on the display. Affects the whole label.
The complete label is normally
Press to store a copy of the current label in the next available memory space. The display will change to show ‘M’ for one second to confirm — see ‘Memory’, page 15.
| MC |
Press | + M in to clear a stored label from the memory. |
Can only be used after using ‘MR’ or ‘SEARCH’ functions.
Displays a small box enabling you to use ▲ or ▲ to select the number of multiple copies of a label. Press ESC to cancel.
Enables a number label or barcode label to be incremented by 1 on each of up to 100 copies of a label. Press ESC to cancel.
Press to select the correct label format for the tape cassette installed. If the label format/tape width are incompatible, there will
be no response to the PRINT key and the display will flash to show the tape width installed; flashing stops when the correct label format is selected. Note that the layout of the text on the label may be altered.
Displays the current label length. Press ESC to cancel or use | ▲ | or |
| ||
▲ to increase or decrease the label length in 2mm (1/¡º") steps. |
| |
Label length can be fixed with the text justified to the left, centre or right of the label (
displayed), or the text can be scaled to fit the length of the label (A displayed) — see page 33.
Rotates the complete label through 90°, as indicated in the display. Text is printed vertically. Press again to cancel.
Press to change the print colour of the label at the cursor position.
DYMO® 6000 Labelmaker | 11 |
