Dymo RH-6000 manual Description of keys

Description of keys

The keyboard The keyboard is divided into two distinct areas:

1.The function keys —

	PREVIEW	ITALIC	BARCODE
ON/OFF	SIZE	STYLE	SYMBOL
	NEW	JUSTIFY	MC	M
PRINT	UL/BOX	WIDTH	M in
123...n	LENGTH	COLOUR	SEARCH
COPIES	CASSETTE	VERT	MR

ON/OFF

SIZE

PREVIEW

+ SIZE

STYLE

ITALIC + STYLE

SYMBOL

BARCODE + SYMBOL

PRINT

+	✂
	PRINT

Switches the power on and off. The Labelmaker will switch off automatically if no keys are pressed after one minute.

The following keys have a dual function. The main function, as printed on the key top, is performed by simply pressing the key. For the secondary function, as printed above the key, press and

hold down followed by the key required.

Changes the character height. The height is normally adjusted automatically as you key in the characters (see ‘Auto-scaling’). To change the height manually, press this key repeatedly to step through the character sizes available, as shown on the display.

Shows a view of the whole label on the display.

A menu appears from which you can select normal (A), bold (A), or outline (A) character styles, as indicated down the right hand side of the display. The whole label will change to your chosen style.

Changes the whole label into italic text (A), as indicated in the bottom right hand corner of the display.

Selects from a number of symbol characters. The selected symbol is inserted into the label at the cursor position.

A menu appears from which you can choose to convert the label into a barcode label.

Prints the label, then cuts the label at the end.

Feeds out approximately 30mm (11/∞") of label tape, then cuts the tape.

10 DYMO® 6000 Labelmaker