16 Dynex 19" LED TVDX-19E310NA15
www.dynexproducts.com

AV (composite video) (good)

1Make sure that your TV’s AC power adapter is unplugged and all connected equipment is turned off.
2Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3Connect an AV cable (not provided) to the VIDEO/Y jack and AUDIO L and R jacks on the back of your TV and to the
composite video and audio out jacks on the cable or satellite box.
4Plug your TV’s AC power adapter into a power outlet, turn on your TV, then turn on the cable or satellite box.
5Press INPUT to open the INPUT SOURCE list.
6Press or to highlight Comp/AV, then press ENTER.
Notes
Cables are often color-coded to match color-coded jacks.
The yellow video connector on the AV cable connec ts to the
green VIDEO/Y jack.
Notes
•The VIDEO/Y, PB, and PR video jacks (used to connect a
component device) share AUDIO L and R jacks with the
VIDEO/Y jack (used to connect a composite device).
When you connect the audio using the AUDIO L and R jacks,
the audio output is analog.
Cable or
satellite box
AV cabl e
(composite video cable)
Back of TV
AV
(composite
video) cable
connector
AV
(composite
video) jack
Audio cable
connectors
Analog
audio jacks
On your TV