54 Dynex 19" LED TVDX-19E310NA15
www.dynexproducts.com
5If you select Custom, press or to highlight
Custom Label, then press .
6Press or to select a character.
7Press to move to the next position. Repeat this
step to enter additional characters. You can enter as
many as 10 characters. If you need to delete a
character, enter a blank space.
8When you complete the label, press MENU. The next
time you press INPUT, the new label appears in the
INPUT SOURCE list.
9Press EXIT to close the menu.
Changing channel settings

Automatically scanning for channels

When you scan for channels, your TV searches for
channels with signals and stores the channel
information in the channel list. When you press CH+ or
CH–, your TV goes to the next or previous channel in the
channel list.
If the TV signal source changes, for example you change
from an outdoor antenna to cable TV (no box), you need
to scan for channels.
1Press MENU. The on-screen menu opens.
2Press or to highlight Channels, then press or
ENTER. The Channels menu opens.
3Press or to highlight Auto Channel Scan, then
press ENTER. The Choose Your TV Source screen
opens.
4Press or to highlight Antenna, Cable, or
Cable/Satellite Box, then press ENTER.
• I f you are using an antenna for a standard or HD TV
signal, select Antenna. Your TV scans for available
channels. The scan may take several minutes.
During scanning your TV searches for digital
channels first. When the digital channel search is
complete, a message appears asking if you want to
search for analog channels. Select Yes to continue
searching for analog channels, or select No to stop
searching for channels.
• If your cable is connected directly to the T V
(without a box), select Cable. Your TV scans for
available channels. The scan may take several
minutes.
• I f your cable or satellite TV is connected to your TV
through a box, select Cable/Satellite Box. Your TV
does not need to scan for channels. A message
tells you to select the correct input source. Press
INPUT, press or to highlight the video input
you connected your TV to, then press ENTER.
Note
You can press EXIT to stop the auto
channel search, but you will need to run
the auto channel search again to create a
channel list.