Dynex DX-19E310NA15 manual 30

30 Dynex 19" LED TVDX-19E310NA15
www.dynexproducts.com
Analog audio
1Make sure that your TV’s AC power adapter is unplugged and the analog speaker system or sound bar is turned off.
2Connect an audio cable (not p rovided) to the (audio out) jack on the side of your TV and to the AUD IO IN jacks on the
analog speaker system.
3Plug your TV’s AC power adapter into a power outlet, then turn on your TV and the an alog speaker system.
4Plug your TV’s power cord into a power outlet, then turn on your TV.
5Turn on the analog speaker system or sound bar, then set it to the correct source. For more information, see the
documentation that came with the analog speaker system or sound bar.
Audio cable
Analog speaker
system
Audio cable
connector
(audio out)
jack
On your TV
Sound bar
Side of TV