34 Dynex 19" LED TVDX-19E310NA15
www.dynexproducts.com
Turning on your T V for the first time
The first time you turn on your TV, the Setup Wizard
opens. The Setup Wizard guides you through setting u p
basic settings including the menu language, time
setting, picture mode, and the TV signal source.
1Make sure that you have:
• Installed the remote control batteries. (Se e page 33
for details.)
• Connected an antenna, cable TV, or satellite TV.
(See page 13 through 18 for detail s.)
• Connected the AC power adapter. (See page 32 for
details.)
2Press (power) to turn on your TV. The Choose Your
Menu Language screen opens.
3Press or to highlight the language you want,
then press ENTER. The Choose Your Time Setting
screen opens.
4Press or to highlight Mode, then press or to
select Manual (to set the date and time manually) or
Auto (to set the date and time automatica lly from a
TV signal source based on the time zone you select).
5If you selected Auto for Mode, press or to
highlight Time Zone, then press or to select
your time zone. You can select Eastern, Central,
Mountain, Pacific, Alaska, Hawaii, Newfoundland,
or Atlantic.
6If you selected Auto for Mode, press or to
highlight Daylight Savings, then press or to
select On (if your viewing area observes Daylight
Savings Time) or Off (if your viewing area does not
observe Daylight Savings Time).
7If you selected Manual for Mode, set the date by
pressing or to highlight Yea r, Month, or Day,
then pressing or to adjust the setting.
8If you selected Manual for Mode, set the time by
pressing or to highlight Time, then pressing
or to select the hour, minute, or AM/PM field. Press
or to adjust the setting.
9Press ENTER. The Choose Your Picture Mode screen
opens.
10 Press or to highlight Home Mode or Retail
Mode, then press ENTER.
If you selected Retail Mode, a message asks you to
confirm your selection. Retail Mode is not an energy
savings mode. Select Yes to continue using Retail
Mode, or select No to change your selection, then
press ENTER.
The Choose Your TV Source screen opens.
11 Press or to highlight Antenna, Cable, or
Cable/Satellite Box, then press ENTER.
Note
If you select Auto, the displayed time will
be incorrect until your TV gets the correct
time from a TV signal source.