Dynex 19" LED TV 33

DX-19E310NA15
www.dynexproducts.com
Using the remote control

Installing remote control batteries

1While pressing the release latch on the back of the
remote control, lift the battery compartment cover
off the remote control.
2Insert two AAA batteries into the battery
compartment. Make sure that you match the + and –
symbols on the batteries with the + and – symbols in
the battery compartment.
3Replace the battery compartment cover.

Aiming the remote control

• Point the remote control towards the remote sensor
on the front of your TV. For the location of the remote
control sensor, see “Front” on page8.
Cautions
• Batteries should not be exposed to
excessive heat, such as sunshine, heat
registers, or fire.
• Battery chemicals can cause a rash. If
the batteries leak, clean the battery
compartment with a cloth. If
chemicals touch your skin, wash
immediately.
• Make sure that batteries are disposed
of correctly. Do not burn or incinerate.
Notes
• Do not mix batteries of different types.
• Do not mix old and new batteries.
• Remove batteries when the charge is
depleted.
• If the remote control is not going to be
used for an extended period of time,
remove the batteries.