Dynex 19" LED TV 61

DX-19E310NA15
www.dynexproducts.com
Specifications
Specifications are subject to change without notice.
Dimensions and weight
Screen
Display resolutions
Tuner
Inputs
One or more
channels do not
display.
Make sure that the channels are
not blocked. See “Setting parental
control levels” on page48.
Make sure that the channels are
not hidden. The channel may have
been deleted from the channel
list. You can tune to the channel by
pressing the number buttons or
you can add the channel back to
the channel list. See “Hiding
channels” on page 55.
If you are using a cable or satellite
box, use the remote that came
with that box to change channels.
Make sure that you have the
correct input selected to view
channels from the cable or
satellite box.
If you are using an antenna, the
digital channel signal may be low.
To check the digital channel signal
strength, see “Checking the digital
signal strength” on page 56.
Password is lost. •Enter 9999 to access parental
controls, then set a new password.
See “Setting or changing the
password” on page 45.
Some settings
cannot be
accessed.
If a setting is grayed, the setting is
not available in the current video
input mode.
TV cabinet
creaks. When the TV is in use, the
temperature rises naturally and
may cause the cabinet to expand
or contract which can cause a
creaking noise. This is not a
malfunction.
Control buttons
do not work. Make sure that the Button Lock
option is set to No. See “Locking
control buttons” on page 46.
Unplug the AC power adapter,
wait a few seconds, then plug the
adapter back in and turn on your
TV.
TV keeps
turning off. Make sure that the sleep timer is
not turned on. See “Setting the
sleep timer” on page50.
Note
If the problem is not solved by using these
troubleshooting instructions, turn off your
TV, then turn it on again.
Problem Solution
Without stand 17.8 × 13.5 × 2 in. (45.2 × 34.2 × 5.2 cm)
4.5 lbs. (2.2 kg)
With stand 17.8 × 13.5 × 6.4 in. (45.2 × 34.3 × 16.3 cm)
5.3 lbs. (2.4 kg)
Screen size measured
diagonally 18.5 in.
Display type LED
Panel refresh rate 60Hz
Display resolution 720p
Panel resolution 1366 (H) × 768 (V)
Aspect ratio 16:9
Contrast ratio
(typical)–panel 500:1
Dynamic contrast ratio–
listvalue 20,000:1
TV brightness (minimum)
cd/m2 140 nits
Comb filter 3d y/c digital
Response time 5 ms
Horizontal viewing angle 90°
Vertical viewing angle 65°
HDMI suggested resolutions 720p, 480p, 480i
Component video suggested
resolutions
720p, 480p, 480i
Analog NTSC
Digital ATSC, 8-VSB, Clear-QAM
HDMI
2 (side)
E-EDID compliant
HDCP compliant
Component video 1 (back)
Composite video 1 (back)
Shared with component Y
Shared audio (component
and composite) Yes
PC/VGA No
3.5mm PC audio input No
DVI
1 (side)
HDMI1 (DVI) jack
Supports Video Only
USB 1 (side)
Supports JPEG and firmware upgrade
Antenna/Cable 1 (back)