Dynex DX-E201 manual Tcp/Ip, Component configuration

Dynex5x7-multi.book Page 18 Thursday, September 8, 2005 11:07 AM

18 Component configuration

2Click the Configuration tab, then check the components listed in the dialog box to make sure that you have all of the following components installed:

•Client for Microsoft Networks

•Dynex DX-E201 CardBus PC Card

•NetBEUI

•TCP/IP

3If any components are missing, click Add to install them. Highlight the component you need, click Add, then double-click the component that you need to install. Click Close to exit.

Note: If you are using Windows 98SE, enable File and Printer Sharing to make your computer visible on the network.

4Click the Identification tab. Type the name of your computer in the Computer name box. Use a unique name.

5If you want to enter a workgroup name, type the name in the Workgroup box. The workgroup name must be identical for all computers on your network. If one computer on your network has a different workgroup name than the others, that computer will not appear in the same workgroup view.

6Click the Access Control tab. The screen that controls file sharing opens.

7Click Share-level access control. If connecting to a NetWare server, share level can be set to User-level access control.