Dynex DX-E201 Setting up the network card, Naming your computer, Click the Identification tab

Dynex5x7-multi.book Page 7 Thursday, September 8, 2005 11:07 AM

Setting up the network card 7

Setting up the network card

Naming your computer

To name your computer and workgroup:

1Click Start, right-click Network Places, then click Properties. The System Properties dialog box opens.

2 Click the Identification tab.

3If you want to name your computer or change your computer’s name, type a new name in the Computer name box. Each computer name on your network must be unique. The computer’s name should be 15 characters or less with no spaces.

4If you want to enter a workgroup name, type the name in the Workgroup box. The workgroup name must be identical for all computers on your network.

5If you want to add an optional description for your computer, type the description in the Computer Description box.

6Click OK.

7Repeat this process for each computer on your network to make sure that they all have a unique computer name and identical workgroup name.