Dynex DX-E201 manual Complete the “File and print sharing configuration” on page

Dynex5x7-multi.book Page 17 Thursday, September 8, 2005 11:07 AM

Component configuration 17

10After restarting the computer, a Logon window opens. Enter a username and password of your choice, then click OK. If you click the Cancel button, you will not be able to log onto the network.

11Make sure that you are connected to the network by double-clicking the Network Neighborhood icon on your desktop. You should see the names of the other computers on the network that have enabled file and printer sharing.

12Complete the “File and print sharing configuration” on page 19.

Windows 98SE/ME network component configuration

After the driver has been installed, you must make some changes to your network settings:

1Click Start, Settings, Control Panel, then click Network. The Network dialog box opens.