Saving Present Position - View and Save Method
The "Quick Save" feature doesn't let you
select the
waypoint number. You
have to use the next available number when
using
that method. The View
and Save method lets you pick the waypoint number that your present
position is stored in. (Note: You can store a position
under a waypoint
NOTE: The Chart Cursor won't work when FASTRAK is on or
if
the
Zone
Alarm or Zoom Window bars are activated.
52 21
SONAR MENU -
PAGE 2
CHART CURSOR
The UltraNavGPS has a chart cursorthat allows you
to
pinpoint
a
target's
depth. The cursor is simply a horizontal line that extends across the
display
from left to right. A
depth box at the end of the line on the
right
side shows the line's
depth. In the example below, the cursor
(line) is at
30.2 feet.
To
display
the chart
cursor,
press
the menu keytwice. Now
press
the
key
adjacent to the "TURN CHART CURSOR ON" label. A screen similar to
the one below appears.
Use the keys adjacent
to the
up
and down arrow to move the cursor
up
or
down to the desired depth.
To turn the chart cursor
off,
press the menu key
twice. Now
press
the
key
adjacentto
the 'TURN CHART CURSOR OFF" label. The UltraNavGPS
returns to the sonar screen without the chart cursor.
Charts
are
usually
laid out according to a Mercator projection which uses
true north. ltyou plot
acourse
on a chart usingthe Mercatorprojection, you'll
either have to convert magnetic readings to true
or use true
readings.
The UltraNavGPS can display navigation information in magnetic or true.
When it's turned on for the first time
magnetic is used. To switch to
true,
press
the
MENU key,
then
press
the
key adjacent to the 'CHANGE SETUP"
label. Now press the MENU key two times. The "SELECT TRUE
BEARING" label is on this page. Finally, press
the
key adjacent to the
"SELECT TRUE BEARING" label. This will cause all
navigation displays to
show information in
degrees true. To switch
back to magnetic, repeat the
above steps. The menu now reads "SELECT MAGNETIC BEARING".
Press the
key adjacent to
this menu for
magnetic data.
WAYPOINT NAVIGATION
HOW TO SAVE A WAYPOINT
Waypoints are locations on
the earth's surface that
you
wish to
go
or return
to. Waypoints are useful for marking shipwrecks, hot fishing spots, and
other fishing or navigational locations. Storing waypoint's in the UI-
traNavGPS's
memory makes it easy
to return to virtually any point in the
world
simply by pressing a few buttons. The UItraNavGPS can store up
to
100
waypoints. You can store your present position as a
waypoint
or enter
latitude/longitude positions as waypoints.
Saving Present Position as a Waypoint (Quick
Save Feature)
The UltraNavGPS lets you save
your
present
position
as a
waypoint
with
only
one
key press. This "Quick Save"
feature lets
you
save the
position
of
a wreck or other locations quickly
and easily.
To save your present position as waypoint, simply press the WAYPT
QUICKSAVE key. The UltraNavGPS takes the present position and
assigns the first available waypoint number to it. It then sounds a
tone
indicating
the location has been stored.
r TURN CHART
FASTRAK
AIJTO
'18.3
FT ---20
4-c
.4 ____
. MORE4
..

e

0
SONAR MENU
PAGE 2 CHART CURSOR
PDF compression, OCR, web-optimization with CVISION's PdfCompressor