NOTES:
TO
OPTIONAL
SPEED/TEMP
SENSOR
TO
OPS
MODULE
TO
AUTOPILOT OR
OTHER MARINE EQUIPMENTS
NMEA INTERFACE
Attach the GPS module's cable to the UltraNavGPS's power
cable. Tags
on the cables identify
both the GPS and the
optional speed/temperature
sensors connector. See the GPS section in this manual for GPS module
installation.
GPS MODULE INSTALLATION
The GPS module can be installed on a flat surface or (with
the
supplied
adapter) on a pole. Mount the module in an area that guarantees
a
clear view of the sky at all times. In order for the module to receive the
signals from the
satellites, it must not be obstructed. An ideal location
is on a cabin roof, or deck. The gunnels also make a good location.
Attaching the pole mounting adapter lets you install the module on a
one inch mast. A high location is preferred. However, for lightning
protection, the antenna shouldn't be
the
highest part
of the boat.
3
FUSE
PDF compression, OCR, web-optimization with CVISION's PdfCompressor