ULTRANAVGPS SONAR
SPECIFICATIONS
UItraNavGPS Dimensions 5.875"H x 7.75"W x 3.875"D
Input Voltage
Current 10-15 vDO
500 ma (lights off)
650 ma (lights on)
192 kHz
600 watts (peak-to-peak)
75 watts (RMS)
3.1"H x 2.4"W
128 H x 80W
10,240 Total
ULTRANAVGPS GPS RECEIVER SPECIFICATIONS
GPS Module Dimensions 2.5"H x 4.1W x 7" D
Channels Five Parallel
Four continuous for position
All satellites in view tracked
Update rate One second
Accuracy Maximum accuracy
achievable with
Standard Positioning Service
Position: 25 meters CEP
Velocity: 0.25 meters/sec RMS
Without SA PDOP.c6.0
NMEA
0183 SENTENCES
RMB Minimum Recommended Sentence, Part B
RMC Minimum Recommended Sentence, Part C
GLL Present Position -
Latitude/Longitude
APA Autopilot Steering Data
DBK Water
Depth
MTW Water
Temperature (oC)
VHW Speed Through Water
(MPH)
VLW Distance Travelled/LOG (NM)
fl,o "\ Myl<ANDmtL/"
FOLJRRAES
I I-
— sa
rr
Pole Mount
First, thread the pole mounting adapter onto the mounting pole or
ratchet base. Align the pole mounting adapter so the module will face
the bow of the boat. Install and tighten the set screw into the pole
mounting adapter and tighten
it securely. This should
prevent
the GPS
module fitm
unscrewing from the
pole. Place the
gasket
onto the
pole
mounting
adapter. Now attach the cable to the GPS module and pass
the cable
through
the gasket, pole mounting adapter, and pole. Set the
GPS module on top of the pole mounting adapter and align the four
threaded holes in the module with the holes in the pole mounting
adapter. Using the four stainless steel 5 mm screws and lock washers
supplied
with the UltraNavGPS, attach the pole mounting adapter to
the GPS module. This
completes the
assembly.
BOW
TAsKET
I I
Transmitter
Frequency
Output Power
(typical)
Size
Display
Pixels __
( '•l
68 5
PDF compression, OCR, web-optimization with CVISION's PdfCompressor