INSTALLATION

4.Secure the rail to the rear of the rack with four M5 machine screws and an adapter plate (see Figure 4).

Tighten all screws at the front and rear of the rail.

Adapter Plate

 

Position 6

 

 

 

Position 5

 

 

Position 4

Bottom of Rack

 

Position 3

or Top of Other

Position 1

Position 2

Cabinet

 

Figure 4. Securing the Rear Rail (Right Rail Assembly Shown)

5.Repeat Steps 2 through 4 for the other rail.

6.To tighten the rail adjustment, assemble four M4 machine screws and four M4 locknuts to the middle of the rail assembly. Tighten using a 7 mm (9/32”) nut driver. See Figure 5.

Repeat for the other rail.

M4 Screws

M4 Locknuts

Figure 5. Tightening the Rail Adjustment (Right Rail Assembly Shown)

20

EATON Powerware® 9140 EBM User’s Guide S 164201623 Rev A FINAL DRAFT 2006 July 14