INSTALLATION

7.Place the EBM on a flat, stable surface with the front of the EBM facing toward you.

8.If the front and rear mounting brackets are already installed, skip to Step 11. If the brackets are not already installed, continue to Step 9.

9.Align the two front mounting brackets with the screw holes on the sides of the EBM and secure with eight supplied M4 flat-head screws (see Figure 6).

10.Align the two rear mounting brackets with the lowest two screw holes on the sides of the EBM and secure with four supplied M4 flat-head screws.

Rear Mounting

Brackets (2)

Front Mounting

Brackets (2)

Figure 6. Installing the EBM Front and Rear Mounting Brackets

EATON Powerware® 9140 EBM User’s Guide S 164201623 Rev A FINAL DRAFT 2006 July 14

21