INSTALLATION

Installing the EBM Batteries

To install the battery trays into the EBM cabinet:

1.Verify that the battery circuit breakers on the EBM rear panel are in the OFF (O) position (see Figure 13 on page 26).

2.Remove the EBM front cover (see Figure 10).

To remove the front cover, loosen the two front cover screws. Grasp the fingergrips on both sides of the cover and pull the cover forward firmly.

Figure 10. Removing the EBM Front Cover

3.Slide the battery trays into the cabinet (see Figure 11). Push each tray in until the battery tray lock on the handle catches to lock the tray in place.

Battery Tray

Lock

Figure 11. Installing the Battery Trays

24

EATON Powerware® 9140 EBM User’s Guide S 164201623 Rev A FINAL DRAFT 2006 July 14