Eaton Electrical 10640205, APR48 Batteries (if applicable) , Rectifiers

Data Power Solutions Quick Start Guide

10640205 February 2009

Batteries (if applicable)

• Always install the batteries according to the relevant battery manufac turer’s instructions.

• Batteries are powerful sources of energy and present a potential electrical shock and energy hazard. The

energy hazard is always present, even if the batteries are not conn ected. Avoid short circuiting terminals of

opposite polarity.

• Batteries are heavy, awkward to handle and can cause personal injur y. To prevent back injury, use correct

lifting and bending techniques when moving batteries. If the batteries are too heavy to move, request

assistance.

• Remove or cover rings, wristwatch and other metal jewelry that might be exposed to battery terminals, before

installing batteries.

• Do not wear synthetic clothing when installing batteries.

• Always use insulated tools.

• Only use a clean soft damp cloth for cleaning the batteries. Do not use cleaning detergents or chemicals.

• When unpacking the batteries inspect them carefully for leaks, corrosion and possible damage. Report any

damage or other battery related problems immediately to your battery s upplier.

• Do not remove the factory-fitted transit insulation covers from the batter ies until access to the battery

terminals is required.

• Do not place tools, loose cables or metal objects (such as interconnecting ba rs) on top of batteries.

�� Do not drop tools, loose cables or metal objects onto intercell connections or terminals of opposite polarity.

• Only terminate cables and interconnecting bars after confirming that th e termination will not create a short

circuit.

• Always tighten the battery terminal bolts according to the battery ma nufacturer’s specification. Failing to do

so can cause erratic battery performance, possible damage to the battery , and/or personal injury.

• Always ensure that any shrouding supplied with the batteries is correctly f itted to cable connectors.

Rectifiers

• To reduce the risk of electric shock and maintain optimum system co oling, always cover empty rectifier

slots with blanking panels (Part Number: IPN 621-05722-63A).

• To avoid electrical shock, do not place hands inside the rectifier shelf.

• Rectifier cases may exceed 100ºC (212ºF), especially after prolonged operation. Use suitable gloves to

remove the hot rectifier.

• Do not attempt to disassemble rectifiers. Return them, (in their origin al packaging) along with the

completed Equipment Incident Report, to your local Eaton dc product repre sentative for replacement or

repair.

整流器

• 为了降低触电风险并保持系统最佳冷却，始终应把整流器盲板（编号：IPN 621-05722-63A）

安装到未安装整流器的空位上。

• 为了避免触电，不要把手伸到整流器架内。

• 整流器外壳温度可��会超过100ºC，特别是在长期运行之后。拆取发热整流器时，应戴上合适的手套。

• 不要尝试拆卸整流器。如果需要更换或修理，应把整流器按照原样打包，