Eaton Electrical V3 - page 20

www.eaton.com

Network Shutdown Module V3 – User Manual - 34 003 934 XU / AE Page 19/65

z Enter the Login and Password (optional)

z The following page appears:

Server and UPS supervision

Section « Information on the protected server»

z Server name / IP address:

The Network name of the machine hosting the Network Shutdown Module and its IP address.

z Operating system:

The operating system of the machine hosting the Network Shutdown Module.

z Contact / Location:

The location of the machine hosting the Network Shutdown Module

the contact person for the machine hosting the Network Shutdown Module.

These values can be configured in the System page.

Section concerning the UPS that powers the protected server

z This icon represents the status of the power device. It can have following

values: Critical/Alert/Normal

z Name/ IP address: The Network name (or IP address) of the device.

z Device: The commercial product name.

z Link: Link to the device Web site (if available).

z Contact / Location: The device contact. (value of syscontact object or can also be configured in the

Device page).

The device location. (value of syslocation object or can also be configured in the Device page).

Status

z Communication: Device communication status (OK / Network Communication Failure / device

Communication Failure).

z Power source: AC Power / Battery.

Contents

Main Network Shutdown Module V3 Table of Contents Page 1 Introduction to the EATONs Network Solution 1.1 Overview 1.2 Monitoring the UPSs over the network 1.3 Protecting the computers / servers New functions: 1.4 Connecting the UPS 1.4.1 Connecting to the Network 1.4.2 Select Network Architecture 1.4.3 Network Performances 2 Installation 2.1 Hardware Pre-requisites (Electrical and Network Connections) 2.2 Software Installation Pre-requisites 2.2.1 On the System Hosting Network Shutdown Module V3 2.2.1.1 Windows Compatibilities: 2.2.1.2 Linux Compatibilities: 2.2.1.3 Mac Compatibilities: 2.2.1.4 Standby configuration (Windows): 2.2.1.5 Broadcast Message configuration (Windows): 2.2.1.6 Firewall configuration (Windows & Linux) and Gateway : 2.2.2 On the System that Displays Web-based Graphical User Interface 2.3 Quick Start 2.4 Software Installation Procedure Page 2.5 Application deployment and silent installation (advanced) 2.6 Uninstalling the Network Shutdown Module 3 Minimal configuration steps 3.1 Introduction 3.2 The IP address of the UPS that powers your server. Page 3.3 Users accounts configuration 4 Use 4.1 Monitoring the server and the UPS(s) 4.1.1 Local access 4.1.2 Remote access Page Page 4.2 System and UPS event log 4.3 UPS Events list Page 4.4 Test the communication with the UPS 4.4.1 Simple Tests 4.4.2 Advanced tests Messages in verbose mode: 4.5 Start and stop the Shutdown Module (advanced) 5 Other Configuration possibilities 5.1 Introduction 5.2 Configure system parameters 5.3 Shutdown Configuration Page 5.4 Checking for Upgrades 5.5 Events and actions (advanced configuration) Page 6 Multi-UPS Systems 6.1 Caution 6.2 Presentation Page Page 6.3 Create a multi-UPS configuration 7 Appendix 7.1 Single UPS Mode compatibility 7.1.1 Card/Proxy compatibility 7.1.2 UPSs compatibility 7.2 Multi-UPS Mode Compatibility list Page 7.2.3 Simple associations of the previous configurations 7.2.4 Configurations NOT supported 7.3 Examples of Multi UPS configurations 7.4 Multi-UPS Systems and Event Management 7.5 Application deployment and silent installation 7.5.1 Introduction 7.5.2 Customized installation package 7.5.3 Install the Shutdown Module in silent mode 7.5.4 Advanced installation options 7.6 Single UPS Shutdown Sequence 1 2 3 4 5 6 Page 7.7 Multi UPS shutdown sequence (example with Static Transfer Switch) 1 2 3 4 5 6 7.8 Additional information on events and actions 7.8.1 Action settings Tab 7.8.1.1 The different actions 7.8.1.2 Add an action 7.8.1.3 System Shutdown Action Page 7.8.1.4 Execute Action 7.8.1.5 Send email Action 7.8.2 Events Tab 7.8.2.1 Notification alarms 7.8.2.2 Protection alarms 7.8.2.3 Multi UPS Systems and Notification Alarms 7.8.2.4 Multi UPS Systems and Protection Alarms 7.8.3 Test tab 7.8.4 The action parameters (execute and send email) 7.8.5 Software utilities 7.8.5.1 Shutdown.bat (Windows Script) 7.8.5.2 Shutdown.sh (Linux Script) 7.8.5.3 Wait (Windows) 7.8.5.4 Windows RunAs command or legacy mgeRunAs software utility Page 7.9 FAQ and Error messages Page Page 8 Glossary Shutdown Duration Shutdown Timer www.eaton.com 9 Acknowledgements 9.1 SQLite 9.2 Pi3Web 9.3 PHP 9.4 OpenSSL Huge thanks from the EATON software development team to the OpenSSL Project. Page www.eaton.com 9.5 Lighttpd Huge thanks from the EATON software development team to the Lighttpd Project. 9.6 WxWidget Huge thanks from the EATON software development team to the WxWidget Project.