www.eaton.com
Network Shutdown Module V3 – User Manual - 34 003 934 XU / AE Page 39/65
7.5 Application deployment and silent installation

7.5.1 Introduction

Network Shutdown Module offers powerful features to easily deploy the application on several computers:
z Silent Installation
z Providing some command line parameters to the installer
z Re-packaging of a customized application
According to your needs you have several possibilities:
First example:
Your computers are powered by a single UPS and you are using the Network Shutdown Module default
configuration.
z Step 1: Copy the Network Shutdown Module package on the different computers (according to Operating
System)
z Step 2: Execute the installation in silent mode and provide the card IP address as a parameter in the
command line
Second example:
Your computers are powered by a Multi UPS system or you don’t use Network Shutdown Module default
configuration.
z Step 1: Install Network Shutdown Module on a computer (interactive or silent mode)
z Step 2: Configure Network Shutdown Module
z Step 3: Create a customized package (containing your configuration)
z Step 4: Copy this package on the different computers (according to the Operating System)
z Step 5: Execute the installation in silent (or possibly in interactive mode)

7.5.2 Customized installation package

After having customized the Network Shutdown Module configuration (name or IP address of Network
Management Card/Proxy, events and actions, etc.), you can build a Network Shutdown Module installation
package which contains your specific configuration.
You can then deploy this Network Shutdown Module configuration on other machines which have the same
operating system.
Note: Specific configuration include the UPS(s) IP address(es), the event and action, … but not the install
path or install mode.
Please proceed as follows to build the customized package (Windows or Linux):