routing table. Turning off IP RIP Receive as before will cause other learned routes to age out after about four minutes.
PARAMETER | DESCRIPTION |
| |
NETWORK | The IP Network number to which this | ||
| RIP entry relates. |
| |
SUBNET BITS/MASK | This shows the subnet mask detected | ||
| by the Router. |
| |
GATEWAY | The IP Address of the next gateway | ||
| used in this route to send a packet to | ||
| the specified network. | ||
SERVICE | The required service that must be | ||
| used to reach a specified network. | ||
TIMER | This will display the time interval in | ||
| seconds, since | this routing entry | |
| was last updated. For the attached | ||
| Network this will be left blank. For | ||
| static IP Routes this will be STATIC. | ||
METRIC | This will indicate the number of | ||
| nodes passed in the route to the | ||
| Network. RIP packets pass on a | ||
| value that is incremented at each | ||
| node. | The metric is used for | |
| selecting the best route if a multiple | ||
| route network exists. | ||
4.2.2 IP: ARP TABLE |
|
|
|
This table gives the current ARP table for the router.
PARAMETER | DESCRIPTION |
IP ADDRESS | The IP Network number to which this |
| entry relates. |
MAC ADDRESS | The MAC Address (Ethernet |
| Address) associated with an IP |
| address. If no MAC address is |
| available “NONE” will be displayed. |
TIMER | Displays the time interval in seconds |
| since a routing entry was last |
| updated. For the attached Network |
| this will be left blank. |
Echo LANlink Router Option User Manual | Issue 1.0 04 December 1997 Page 25 of 59 |
