Shaft Hedge Clipper 13

Operator’s Manual

adjusting cutting angle

WARNING

Never adjust cutting assembly with engine running.

WARNING

Hedge clipper blades are sharp. Always wear gloves when adjusting cutting assembly.

WARNING

DO NOT stand hedge clipper on end when adjusting cutting angle, otherwise serious injury may result

1.Place unit on a flat clear area. Assure stop switch is in the “STOP” position.

2.Pull out indexing ring (A), and turn ¼ turn to lockout position.

3.Turn hedge clipper ¼ turn so that indexing ring faces downward.

4.Release hand-guard blade lock (B) with right hand, while holding blade-adjustment handle (C) with left hand.

5.Rotate blades to desired cutting position.

6.Turn indexing ring ¼ turn to lock blade in place.

WARNING

Gear case assembly becomes HOT during use. Always grip assembly at blade-adjustment handle when making cutting angle adjust- ments, otherwise serious injury may result.

A

B

B

C