![](/images/backgrounds/96655/96655-2811x1.png)
| POWER EDGER | 11 | |
| OPERATOR'S MANUAL | ||
|
|
|
|
|
|
|
|
FRONT HANDLE
Tools Required:
Parts Required: Front Handle, Lower Bracket, 4 - 5 x 35 mm screws
NOTE
Label shows minimum spacing for front handle location.
1. Assemble front handle and bracket loosely to drive shaft.
2. Position front handle in comfortable operating position and tighten |
|
| MIN |
|
|
|
|
|
| ||
|
|
|
| ||
screws. |
|
|
|
|
|
|
| SPACING |
OPERATION
WARNING
Moving parts can amputate fingers or cause severe injuries. Keep hands, clothing and loose objects away from all openings. Always stop engine, disconnect spark plug, and make sure all moving parts have come to a complete stop before removing obstructions, clearing debris, or servicing unit.
NOTICE: Use of unmixed, improperly mixed, or fuel older than 90 days, (stale fuel), may cause hard starting, poor performance, or severe engine damage and void the product warranty. Read and follow instructions in the Storage section of this manual.
FUEL
WARNING
Alternative fuels, such as
Fuel Requirements
Gasoline - Use 89 Octane [R+M/2] (mid grade or higher) gasoline known to be good quality. Gasoline may contain up to 10% Ethanol (grain alcohol) or 15% MTBE (methyl
Two Stroke Oil - A