Eclipse - Fujitsu Ten CD3000 Press the CD button, Insert a CD into the disc slot, label Side up

	How to operate the CD (MP3/WMA) player
Listening to CD (MP3/WMA file)	Switching to the CD player
	mode

1 Press the [CD ] button.

The front panel opens.

If a disc has already been loaded, the disc is ejected by pressing the [CD ] button.

Insert a CD into the disc slot, label

2 side up.

The CD will immediately start playing.

ATTENTION

When a CD is already loaded, press the [DISC] button to switch to the CD mode.

● Note ●

•When music data recorded in the normal way (CD-DA) is present on the same disc with MP3/WMA music files, the normally recorded music data will be played. To listen to the MP3/WMA music files, press the button [3] for more than one second.

•When a non-MP3/WMA file is played, "NO SUPPORT" will appear.

•The optional CD changer cannot be used to play MP3/ WMA files.

CAUTION

Do not press the [CD ] button while CD is being inserted. This could cause an injury and damage to the front panel.

First press the [DISC] button for less than one second to switch to the disc mode. It is assumed here that a CD has already been loaded into the unit.

Press the [DISC] button for less

1 than one second to switch to the CD player mode.

This starts CD play.

If an external CD changer and iPod is connected, each additional press of the [DISC] button will switch modes from CD player ➔ CD changer 1 ➔ CD changer 2 ➔ iPod ➔ CD player.

A changer or player with no discs loaded will be skipped.

ATTENTION

•Playback may be intermittent when there is a scratch on a CD or when the recorded side is dirty.

•Only two external CD changers may be connected.

IV

19