Eclipse - Fujitsu Ten CD3000 Changing the reception, Sensitivity for automatic, Scanning, DX Mode

	How to operate the tuner
Changing the reception	Changing the radio band
sensitivity for automatic	location
scanning

The equipment lets you select the reception sensitivity to be used for automatic scanning of stations. The two sensitivity modes available for this equipment are LOC mode and DX mode.

	During automatic scanning, the
	reception sensitivity switches
	automatically to one of two levels.
	Initially the reception sensitivity is
LOC Mode	set to the low level so that only
	stations with strong signals are
	received. If no stations could be
	received, the reception sensitivity is
	increased so that stations with
	weaker signals can also be
	received.
	Because the reception sensitivity for
	automatic scanning is set to the high
DX Mode	level from the start, even stations
	with weaker signals can be received.
	(Signal crossover may result in
	some stations being hard to hear.)

ATTENTION

When an optional HD Radio tuner is connected, reception sensitivity is set to the LOC Mode. The DX Mode is unavailable. (U.S.A. only)

Check that the equipment is in

1 standby mode.

Press and hold the button [1], then

2 the [FM AM] button, and hold both for more than three seconds.

The mode switches between LOC mode and DX mode each time the buttons are pressed.

The location for the radio bands used between the North American region and the Asia/ Australia/Latin region can be switched. The default setting is USA (North America).

ATTENTION

When an optional HD Radio tuner is connected, radio band location is set to USA. Other radio band locations are unavailable. (U.S.A. only)

Check that the equipment is in

1 standby mode.

Press and hold the button [3], then

2 the [FM AM] button, and hold both for more than three seconds.

The radio band switches in the order shown below each time the buttons are pressed.

USA ➔ ASIA ➔ AUS ➔ LATIN

➔USA www

After this, the broadcast stations will be searched for automatically and stored in buttons [1] to [6].

V

25