Eclipse - Fujitsu Ten CD3000 manual Playing the beginning of tracks Scan Listening to a CD

About optional equipment

How to operate the equipment with an optional CD changer connected

This section covers the operation of an optional CD changer that is connected to the equipment. To switch from another mode, press the [DISC] button for less than one second.

Playing the beginning of tracks (SCAN)

Listening to a CD

Press the [DISC] button for less

1 than one second.

Each press of the button switches the mode from CD player ➔ CD Changer 1 ➔ CD Changer 2 ➔ CD player.

A changer or player with no discs loaded will be skipped.

Advancing to the next track or returning to the beginning of the track being played

Turn the [SEL] button to the left or

1 right.

Turn to the right:

Advances to the next track.

Turn to the left:

Returns to the beginning of the track being played. (Repeat turning for previous tracks.)

Fast Forward/Rewind

Fast forward or rewind the song currently being played.

Press and hold the [ ] or [ ]

1 button.

[ ] button: Fast forward.

[ ] button: Rewind.

1 Press the [4 SCAN] button.

Pressing the button for less than one second causes the changer to move up to the next track and play it for 10 seconds, then move up to the next track and play it for 10 seconds, and so on, on one CD, until the button is pressed again.

Press the button for longer than a second to play the first 10 seconds of the first track of every CD loaded.

ATTENTION

•To continue playing a desired track, press the button again to stop scanning.

•After the entire disc is scanned once, ordinary playback starts from the point where scanning started.

Repeating the same track (REPEAT)

1 Press the [5 RPT] button.

Pressing the button for less than one second causes the changer to repeat the track currently being played, until the button is pressed again.

Press the button for longer than a second to repeat all tracks on the CD being played.

50