Tracking calls

You can track the number and duration of calls made and received on your phone.

1.Select Menu Settings Call Information.

2.Select a timer:

-Recent Calls-Tracks all calls made and received by your phone since

this timer was last reset. To reset this timer, highlight Reset and press .

-All Calls Timer-Tracks all calls made and received by your phone. This timer cannot be reset.

-Kbyte Counter-Tracks the kilobytes of data sent and received by

your phone. It counts only SO 33 packet data. When the total reaches 999,999kb, the counters reset automatically. To reset this counter manu- ally, highlight Reset and press .

Timing your calls

You can set your phone to beep 10 seconds before each minute passes when you are on a call.

Select Menu Settings Sounds Minute Alert Enabled.

Receiving data or faxes

Your phone may be able to receive certain data or faxes, depending on the system sending the information. You can not receive voice calls while the phone is in data/fax mode. For more information, see „Data settings“ on page 51.

Setting roaming alerts and ringers

Setting an alert for roaming

You may use this setting if you want the phone to alert you when you roam outside of your home service area.

1.Select Menu Settings Network Roam/Svc Alert.

2.Select an option and press .

-When no svcalerts you with three tones decreasing in pitch when ser- vice is lost and three tones increasing in pitch when service is acquired again.

-Roam Change alerts you with two decreasing tones when roaming service is acquired and three increasing tones when home area service is acquired again.

-Any Changealerts you with three increasing tones if there is a change inroaming service or three decreasing tones if the phone loses service.

27

Page 28
Image 28
Ecom Instruments Ex-CDMA 02 manual