Data settings
Setting Com port speed
The Com Speed sets the data rate at which your phone connects to a laptop or PC, or at which it sends and receives
1.Select Menu ‡ Settings ‡ Accessories ‡ Com Speed.
2.Select the speed. The options are: 19.2 kbps,115.2 kbps (default), 230.4 kbps.
Note: There may be a higher charge for making calls using
Setting the phone to receive data or faxes
Your phone may be able to receive certain data or faxes, depending on the system sending the information. To receive data or faxes, you must connect the phone to a laptop or PC and switch the phone from voice mode to data/fax mode.
1.Connect the phone to the laptop or PC.
2.Set the Com Speed.
3.Select Menu ‡ Settings ‡ Network ‡ Data/Fax Calls.
4.Press
to select an option:
-Voice only - Allow only voice calls.
-Fax, next callor Data, next call - Set the phone to fax mode or data mode for the next incoming call or the next 10 minutes.
-Fax, until offor Data, until off - Force the phone into fax mode or data mode until the phone is turned off.
Note: You cannot receive voice calls while the phone is in data/fax mode. Connecting to a TTY/TDD device
You can connect the phone to a TTY device for the hearing impaired.
Note: Enable TTY only when using the phone with a TTY device.
1.Connect the TTY device to the phone.
2.Enter 
from your keypad.
3.Press
to select the TTY option.
Setting position location
This setting allows you to share your location information with network ser- vices other than emergency services (911, 111, 000, etc.), in markets where service has been implemented.
Note: This feature works only when your phone is in digital mode. You do not have the option of turning off the locator to emergency services.
51
