Ecom Instruments Ex-GSM 01 manual Charger connector

9 — End key , to end a call, or to exit functions.

10 — Keys - , to enter numbers and characters.

Keys and are used for various purposes in different functions.

1 – Charger connector

2 – Pop-Port™ connector used, for example, for headsets and the data cable

(please refer to the control drawing number: 0163EX04A for allowed con-

nections to Ex-GSM 01).

3 – Camera lens (deactivated)

4 – Infrared (IR) port

10.1.5 Changing the shell and key mat

Note: Do not open the device inside Ex-hazardous areas. Before removing the cover, always switch off the power and disconnect the charger and any other device. Avoid touching electronic components while changing the covers.

Always store and use the device with the covers attached.

1 – With the back of the phone facing you, press the indentations on both sides of the lower shell. Slide the bottom of the shell off to remove it.

2 – To remove the top shell, slide it upwards.

3 – To remove the key mat from the lower shell, push it down, and pull it out of the shell.

4 – To replace the key mat, slide it into the lower shell, and press it into place.

13