Rear view
3 | 4 | 5 6 7 | 8 | 9 | 10 |
IN | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | |
OUT | |||||||||
|
|
|
|
|
|
|
| ||
|
|
|
| CAMERA |
|
|
|
| |
IN | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | |
OUT | |||||||||
|
|
|
|
|
|
|
| ||
|
| CLAMPER |
|
|
|
|
|
|
VIDEO VIDEO
Y/C
OUTPUT A OUTPUT B
CLAMPER
OUT IN
VIDEO CASCADE
SERIAL BUS SERIAL BUS
AUDIO IN
1 | 2 |
3 | 4 |
OUT | IN |
AUDIO | CASCADE |
| AUDIO OUT |
OPTION SLOT
AC IN~
MAIN
OFF ON
1 2
GND
11 12
ALARM OUT
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
13
RESET |
ALARM IN |
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 |
14 |
100 |
|
|
|
|
| 10 100 |
| 10 |
|
|
|
|
|
| ||||||||||||
|
|
|
|
|
|
|
|
|
| STORAGE |
|
| COM |
|
|
|
|
|
|
| ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CLOCKADJ | ADJCLOCKOUT | REC | STOPREC | EMERGENCY | RESERVED | OUTMODE1 + | OUTMODE1— | OUTMODE2 + | OUTMODE2— | OUTMODE3 + | OUTMODE3— | OUTMODE4 + | OUTMODE4— | OUTCALL+ | OUTCALL— | 350mAMAX 12VDCOUT |
|
|
|
|
| TERMRS485+ | TERMRS485— | RS422+ RS422— | RS232 | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| RS485 | RS485 |
|
| P T Z |
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| OUT | IN |
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
15 16 17
1.MAIN switch
This is the main power switch. To use this unit, set this switch to ON. Otherwise, the front power but- ton will not turn the unit on/off.
2.AC power socket
Used to connect the power cord. Earth terminal is used for safety. Use the 100 to 240 V plug with ground terminal.
•This unit must be earthed at all times. Never connect this unit to a power outlet which does not have an earth terminal.
•Please use the supplied AC power cord.
3. CAMERA connectors
•Do not connect superimposed voltage camera because it can cause damage to the unit.
CAMERA IN connectors
Input connector for signal of camera (BNC connector).
CAMERA OUT connectors
Outputs video signal from input camera. If the MAIN switch is turned on, the signal from CAMERA IN connector is looped out to this connector.
5.VIDEO CASCADE connectors
VIDEO CASCADE IN connector
Input video connector for cascade connection.
VIDEO CASCADE OUT connector
Output video connector for cascade connection.
6.SERIAL BUS port
Input and output port for the device equipped with SERIAL BUS connector.
7.LAN-A port
Port for connection of NAS hard disk unit to back up the recorded data.
LAN-B port
Port for communication using web browser.
8.AUDIO connectors
AUDIO IN connectors
Input connector for audio signal (RCA pin).
AUDIO CASCADE IN connector
Input audio connector for cascade connection.
AUDIO CASCADE OUT connector
Output audio connector for cascade connection.
AUDIO OUT connector
Output connector for audio signal (RCA pin).
4.VIDEO OUTPUT connectors
OUTPUT A VIDEO connector
Output connector which sends video signal to dis- play monitor (BNC connector).
OUTPUT A S(Y/C) connector
Output connector which sends separate brightness signals and colour signals for higher picture quality. Simultaneous output along with OUTPUT A VIDEO connector is also possible.
OUTPUT B VIDEO connector
Output connector which sends video signal to sec- ond (B) monitor (BNC connector) (
see page 17).
9.Keyhole for antitheft lock
Used to connect a commercially available antitheft cable manufactured by Kensington.
10.OPTION SLOT
Used to attach an optional boards.
11.GND terminals
Common GND terminal.
12.RS-232C connector
Used to connect to a host device equipped with RS- 232C connector (such as a personal computer). This unit can be controlled from other devices via this connector.
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Beginning
15
